Description
| Mechanical | |
|---|---|
| Dimensions | 153 x 84 x 39.5 mm (6.02 x 3.31 x 1.56″) |
| Weight | 250 g (8.82 oz) |
| Enclosure material | UV-stabilized polycarbonate |
| Mounting | Pole mount, wall mount (Kit included) |
| Wind survivability | 200 km/h (125 mph) |
| Wind loading | 20 N at 200 km/h (4.5 lbf at 125 mph) |
| Hardware | |
| Networking interface | (1) 10/100/1000 MbE RJ45 port |
| Power method | 24V passive PoE (Pairs 4, 5+; 7, 😎 |
| Power supply | 24V, 0.5A Gigabit PoE adapter (Included) |
| Supported voltage range | 22—26V |
| Max. power consumption | 8.5W |
| ESD/EMP protection | Air/contact: ± 24kV |
| Operating temperature | -40 to 60° C (-40 to 140° F) |
| Operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| Software | |
| OS | airOS® |
| Modes | PtMP CPE only |
| Management interface | Bluetooth management for easy setup over UISP App WEB UI |
| Minimum software requirements | Any modern web browser/iOS™ or Android™ based smartphone |
| System | |
| Maximum throughput | 900+ Mbps* *FW version 2.3.0 and later. |
| RF | |
| Operating frequency* US/CA U-NII-1 U-NII-2A U-NII-2C U-NII-3 EU Worldwide | 5150 – 5250 MHz 2400 – 2483.5 MHz 2400 – 2483.5 MHz |
| Max. conducted TX power | 22 dBm (per chain) |
| Channel bandwidth | 10/20/30/40/50/60/80/100 MHz* *FW version 2.3.0 and later. |
| Antenna gain | 13 dBi |
| Cross-pol isolation | 20 dB |
| Max. VSWR | 1.8:1 |
| Beamwidth | HPOL/VPOL/elevation: 45° |
| Polarization | Dual linear |
| LEDs | |
| System | Flashing white: bootup in progress White: ready for use, not connected to UISP application Flashing blue: locate in progress Blue: connected to UISP application Blue/white: firmware upgrade in progress |